McMaster-Carr

More the once the ball joints on the sway bar had come apart. These were brand new from Moss Motors and just could not take it. So some high strength linkages will have to be custom made.

I ordered four:

60645K451 HIGH-STRENGTH BALL JOINT ROD END, LINKAGE, 7/16″-20 RH THRD FEM SHANK W/RH THRD STUD SAME AS 60645K45

and one:

98805A032 18-8 STAINLESS STEEL THREADED ROD, 7/16″-20 THREAD, 2′ LENGTH

From McMaster-Carr for a total of less that $45, which is $10 less than buying the parts from Moss.

The ball joints are just slightly longer than the entire length of the original part. Fill that gap with a copper washer and then squash that washer as you turn the ball joints to the proper position to keep them locked in place.

IMG_5006IMG_5008

Comments are closed.